Manufacturing number : 350110
Manufacturing year : 2001
Manufacturing origin : Swiss
Voltage : 380/50/3
Netweight : 5500 kg
Custom position : 8457.1020
Colour : blue
Dimensions : 2955x2190x2713 mm
TECHNICAL DATA
: (In view of the constant improvements made to our products, technical data, dimensions and weights appearing in this list are subject to change without notice.)
TRAVELS :
Longitudinal, X-axis : 1020 mm
Cross, Y-axis : 540 mm
Vertical, Z-axis : 540 mm
Spindle nose to table surface : min 155 – max 665 mm
Spindle center to column : 584 mm
TABLE :
Length : 1120 mm
Width : 540 mm
Max weight : 700 kg
3 T-slots : von 18 mm
Distance between T-slots : 160 mm
SPINDLE :
Taper size : BT 40 / ISO 40
Motor power : 13 kW
Speed range : 8000 t/min
Torque : 82.7 Nm
Tool clamp force : 800 kg
OPTION :
Gearbox : 8’000 min-1
High speed : 12’000 / 15’000 min-1
Torque with gearbox : 330 Nm (375min-1)
Torque with high speed (12000min-1) : 55,2 Nm (2250 min-1)
Axis motor
Fanuc : 1,6 kW
Siemens : 2,29 kW
FEED :
Rapid rates, each axis : 30m/min
Cutting feed rate, max : 12m/min
Jog feed rate, max : 30 m/min
TOOL CHANGER (ATC)
Carousel capacity : 20
Swing arm capacity : —
Swing arm capacity, option : 24
Shank type : ISO 40
Max. tool diameter : 89 mm
Max. diameter with 1 empty post : 152,4 mm
Max. tool weight : 6 kg
Max. tool length : 250 mm
CHIP TO CHIP
Carrousel-type : 6.5 – 8.5 sec.
Swing-arm type : 2.5 – 4.5 sec.
PRECISION
Positioning : +/- 0,005 mm
Repeatability, axis-X : 0.002 mm
Repeatability, axis-Y and Z : 0.002 mm
With linear scales (option) : 0.002 mm
BALL SCREWS :
Diameter (all axes) : 32 mm
Pitch (all axes) : 10 mm
COOLANT SUPPLY :
Tank : 360 L
Pump capacity : 50 L / min
Coolant through spindle 20 bar (option)
Chips flush (option)
errors and omissions excepted data gived without obligation
Inventory no 23180123 consisting of :
– 1 collet holder ESX-25 ISO 40 with collet Ø 8 mm
– 1 do ESX-32 ISO 40 with collet Ø 8 mm
– 1 do ESX-32 ISO 40 with collet Ø 20 mm
– 1 do ESX-32 ISO 40 with collet Ø 4 mm
– 1 do ESX-16 ISO 40 with collet Ø 4 mm
– 1 do ESX-40 ISO 40 with collet Ø 20 mm
– 1 boring holder Iso 40 BLITZ
– 1 cylindrical milling holder ISO 40 Ø 10 mm
– 1 do Ø 18 mm
– 1 do Ø 24 mm