TURNING AND MILLING CENTER BUMOTEC TYPE S-191FTL-R

Manufacturing origin : CH
Netweight : 4200 kg
Custom position : 8458.9120
Voltage : 3/N/PE/400V/230V 50HZ
Dimensions : 220X205X250 cm

TECHNICAL DATA

MACHINE BASE

Axis travel Z = 400 mm
: Y = 200 mm
: X = 410 mm
Power / thrust force
Z-Y 2.5 kW / 550 daN
: (linear motor option =7.2 kW/350 daN)
X 4.8 kW / > 550 daN

Travel speed X-Y-Z 40 m/min
: (linear motor option = 50 m/min)
Acceleration X-Y-Z-W 8 m/s2 / 0.8 g
: (linear motor option =10.4 m/s2 /1.1g)
Resolution X-Y-Z-W 0.0001 mm

MAIN SPINDLE + C1

Power 7,5 kW
Torque/peak 22 / 28 Nm
Direct measuring system
Resolution 0.0001°
Accuracy 0.001
Bar passage Ø 32 mm
Turning speed 72’000°/min
Clamping force, turning 4’900 N at 6 bar

B-AXIS (TOOL HOLDER SPINDLE AXIS INCLINATION)
Power 4.3 kW
Torque/peak 119 / 226 Nm
Angular range -25° / +115
Direct measuring system
Resolution 0.0001°
Accuracy 0.001
Rotational speed 36’000°/min
Support torque 200 Nm

TOOL SPINDLE
Power 5 kW
Torque 6 to 800 min-1
Maximum speed 30’000 min-1
Clamping force 2’000 N
Clamping torque mechanical clamping with straight teeth
Tool taper HSK 40 (A or E)
Tool clamping force 1000 DaN
Lubrication in the centre of the tool 30 to 80 bar (optional)

TOOL CHANGER
Number of stations 30 (for HSK 40)
Tool change time 1.2 sec.
Chip-to-chip time 3.4 sec.
Max. tool diameter Ø 40 mm
: (80 mm if adjacent station empty)
Max tool length 130 mm
Max. tool weight 1.5 kg

CNC control type Fanuc 30i/31i

Installed power 25 kVA

Linear motor drive” option

Y-axis (transverse axis)
Stroke 200 mm
Power 4.8 kW
Feed power 240 daN
Resolution 0.0001 mm
Max. feed rate G0 50 m/min
Max. feed rate G1 20 m/min
Measuring system glass scale

Z axis (longitudinal axis)
Stroke 400 mm
Power 7.2 kW
Feed power 360 daN
Resolution 0.0001 mm
Max. feed rate G0 50 m/min
Max. feed rate G1 20 m/min
Measuring system glass scale

Including 8 kW cooling unit
And integration of an emergency stop system.

errors and omissions excepted-data given without obligation

Inventory no.2220114, machine comprising :

CONTROL
Fanuc 30i/31i, with 14″ display

LINEAR MOTOR FEED OPTION
for Y and Z axis

TURNING-MILLING FUNCTION
With integration of an indexing system (8 positions) at the tool holder spindle,
Conversion of the tool magazine to the HSK40-A tool holder,
increase of spindle speed to 5500 min-1

CNC OPTIONS
for turning operations: integration of turning options in the CNC control, synchronisation and correction lists for turning tools

PRM” WORKPIECE REWORKING UNIT WITH 4 POSITIONS, FOR MACHINING THE 6TH SIDE:
In the idle state, the unit is located under the main spindle C1.
The rework unit moves on the W axis, which is parallel to the C axis.
Max. speed W-axis: 40 m/min.
W-axis travel: 310 mm.
With
2 vices – power at 5 bar: 3500N
1 tailstock

INCREASE OF SPINDLE PASSAGE
increase from 1 to 50 mm (main spindle)

RENISHAW” TOOL MEASURING DEVICE T27
Measurement of the length of the turning tool.
Routine detection by M-code.
Automatic tool breakage control.

TOOL MAGAZINE EXTENSION
Increase of tool capacity from 30 to 60 stations
Max. tool length : 130 mm 130 mm / max diameter: Ø 80 mm.
Max. tool weight: 1.3 kg.

COOLANT THROUGH THE SPINDLE
100 bar, 25 L/min, 400L tank

ADAPTATION AND PREPARATION HP THROUGH THE MILLING SPINDLE
Mechanical and electrical integration of the turning clutch.

SPINDLE REDUCTIONS
1x Ø 12.0 mm, 1x Ø 24.0 mm, 1x Ø 36.0 mm

WORKPIECE RECEIVER
With 2 baskets

WORKPIECE UNLOADING BELT
Exit on the left side of the machine
Adjustable feeds

FILTER SYSTEM WITH PAPER BELT

CLAMPING SYSTEM FOR CLAMPS F-48

ADAPTATION FOR W-20 CLAMPS

PREPARATION FOR BAR FEEDER INTEGRATION