SENSITIVE DRILLING MACHINE SERVO 7150

TECHNICAL SPECIFICATIONS:

Drilling capacity in steel at 60 daN/mm² 3 mm
Self-tightening chuck capacity (optional) 0-3 mm
Type B8 collet chuck capacity 1-6.4 mm
Quill diameter 30.5 mm
Drilling depth 38 mm
Depth stop and dial gauge graduations 0.05 mm
Vertical head travel on column 170 mm
Distance between column and spindle axis 89 mmMinimum/maximum distance between table and spindle nose 0-180 mm
Minimum/maximum distance between table and chuck nose 0-130 mm
Useful table surface area 165 x 152 mm
Table dimensions 182 x 300 mm
Total machine height 342 mm
Spindle speed: Low range – continuously variable 200 to 4000 rpm
High range – continuously variable 1000 to 20000 rpm
Thyristor-controlled motor 220 volts single-phase – 50 Hz 250 W : : : : :

Unless otherwise stated, the technical specifications are provided without obligation.