CENTRIFUGAL POLISHING MACHINE “OTEC” TYPE CF2X18

Manufacturing origin EU – Germany
Netweight 250 kg
Dimensions 150x120x200 cm

TECHNICAL DATA

CF 2×18-SP/SP/AG centrifugal force machine for non-alloy brass wet processing
with 2 working tanks with a nominal volume of 18 litres.

Technical data:
– Operating voltage: 400 V, 50/60 Hz, VS max. 16 A
– Installed power: 1.8 kVA
– Control voltage: 24 V
– Temperature range: 10 – 40°C
– Protection: IP 54
– Color: blue, RAL 5002
– Standards: VDE, UVV, C

Basic equipment :
– 18 l heavy-duty polyurethane work tank (Ø int. 330 mm, profiled)
– Sharpening and polishing in a single pass
– Enhanced sharpening effect thanks to low water passage
– Turntable with flow-optimized drive vanes.
– Water flows through the hollow shaft in the middle of the bowl (wet bowl).
– Ceramic micro-joints for processing thin parts and using the smallest media
media (low maintenance).
– High-precision platen mounting (corosion-resistant ceramic seal system – wet bowl).
– 2 x 0.90 kVA drive motors with protective circuit breaker
– Machine construction in light metal profile
– Tank temperature monitoring
– Dosing unit with two pumps, one for water and one for abrasive compound.
– Water flow rate: 2-30 l/h wet process
– Water flow: 5-40 l/h for dry treatment
– Display of treatment time, rotation speed, automatic compound dosing,
preset start of operation. omterriètopm of cycle and operating hours
– Setting of cycle time and speed parameters
– Start/Stop of work cycle
– Memory for 500 working programs

errors and omissions excepted-data given without obligation