Manufacturing origin : Swiss
Voltage : 380/50/3
Netweight : 1570 kg
Custom position : : 8458.1120
Dimensions : 1830x1260x1700 mm
TECHNICAL DATA
Capacities
Max. turning diameter : Ø 270 mm
Max. swing over carriage : Ø 115 mm
Centre height over carriage : 60 mm
Turning length B32 : 265 mm
Headstock A2-4
Spindle for Schaublin collets : W20 / W25 / F38 / B32
Spindle speed, continuous : 50 – 5’000 min-1
Spindle inner diameter (without chuck key) : 39 mm
Max. bar passage in collet W20 : 14,5 mm
Max. bar passage in automatic chuck : 32 mm
Max. recommended turning diameter : 200 mm
Pneumatic clamping
Adjustable axial clamping force, force at 5 bar : 1’150 daN
Cross slide
Cross travel, X axis : 180 mm
Resolution, X-axis (at radius) 0,0005 mm
AC motor drive, continuous / intermittent torque : 4 / 14 Nm
Ball screw, diameter x pitch : Ø 20 x 5 mm
Longitudinal travel, Z axis : 390 mm
Resolution, Z axis : 0.001 mm
AC motor drive, continuous / intermittent torque : 4 / 14 Nm
Ball screw, diameter x pitch : Ø 32 x 5 mm
Feed rates
Working feeds, X and Z axis, stepless : 0 – 5 m/min
Rapid feeds, X and Z axis : 8 m/min
Feed forces, X / Z axis, continuous : 503 / 503 daN
Tooling system: Revolver
Standardised tool holder attachment : VDI 20
Number of tool stations : 8
Number of live tool stations : 4
AC motor drive, continuous / intermittent : 0.55 / 1.1 kW
Spindle speed, stepless : 30 – 5’000 min-1
Max. tool cross-section : 16 x 16 mm
Integrated coolant and indexing in both directions : yes
Cooling
Tank capacity : 55 L
Pump capacity : 10 L/min
Pressure : 1.7 bar
Pneumatic tailstock
Taper of the spindle sleeve : Morse 3
Spindle outer diameter : 45 mm
Spindle stroke : 70 mm
Adjustable contact force : 25 – 260 daN
Tip height from ground : 1’162 mm
errors and omissions excepted data gived without obligation
Inventory no. 2210081, machine consisting of :
– 1 Pneumatic 3-jaw chuck 3 jaws Ø110 [mm] A2-4
– 38 Sets of soft jaws
– 1 Pneumatic tailstock MT3 ref 0125-65250-000
– 1 Clamping device for B32 – A2-4 collets
– 1 Combined adjustable stop and extractor for B-32 collets ref 0125-27070-000
– 1 Foot switch for chuck clamping/unclamping
– 1 VDI 20 rotating axial milling drill head for ESX20 collet with EX20 nut
– 1 VDI 20 rotating radial milling drill head for ESX20 with sw32 nut
– 1 VDI 20 boring bar holder Ø 8 mm shape E2 ref 4100-00147-000
– 2 Ditto Ø 10 mm shape E2 ref 4100-00148-000
– 2 Ditto Ø 12 mm shape E2 ref 4100-00149-000
– 1 Ditto Ø 16 mm shape E2 ref 4100-00150-000
– 1 Ditto Ø 20 mm shape E2 ref 4100-00151-000
– 1 VDI 20 tool holder for insert drill Ø 16 shape E1 ref 4100-00144-000
– 1 Ditto Ø 20 mm shape E1 ref 4100-00145-000
– 1 VDI 20 collet holder for ESX-32 collet with EX nut
– 1 Ditto for ESX-16 collets with nut EX
– 1 Albrecht VDI20 drill chuck capacity 1-13 mm shape AD
– 3 VDI 20 radial toolholders left, short, shape B2 ref 4100-00140-000
– 1 adjustable dito
– 1 radial toolholder VDI 20 inverted left, short, shape B4 ref 4100-00141-000
– 1 VDI 20 axial toolholder, left, shape C2 ref 4100-00142-000
– 8 VDI 20 steel protective plugs, shape Z ref 4100-0160-000
– 33 various B32 collets
Service manual, operating manual, electrical manual, FANUC 18i manual
| Weight | 1700 kg |
|---|---|
| Etat | Opportunity |
