CCN LATHE SCHAUBLIN TYPE 180-CCN R-TM A2-6

Manufacturing origin : Swiss
Voltage : 380/50/3
Netweight : 2500 kg
Custom position : 8458.1120

TECHNICAL DATA

Capacities :
Maximum turning diameter : 270 mm
Maximum swing over carriage : 160 mm
Height of centres over carriage : 83 mm
Maximum swing over bed : 430 mm
Turning length between centres (according to equipment) : 630 mm

Headstock :
Standardized spindle nose, for use of several collets and jaw-chucks by means of adapter sleeves
Accessories for SCHAUBLIN collets : B45/F66
Maximum throughbore, dia. : 36 mm/60 mm
Diameter of standard chck : 210 mm
Direct AC motor drive, power at 100%/50% duty factor : 15/18,5 kW
Max. torque at 100%/50% duty factor : 135/165 Nm
Spindle speeds, stepless : 4000 min-1
Spindle positioning increment : 0,1°

C Axis :
Programmable increment : 0,001°
Spindle locking : 80 Nm
Pneumatic closing Cylinder, maximum 5 bar, maximum clamping force : 3400 daN

Apron and carriage :
Transverse stroke (X-axis) : 230 mm
Rsolution, on radius : 0,0005 mm
AC motor drive, torque : 3 Nm
Ball screw, dia. x pitch : 32 x 5 mm
Longitudinal stroke (Z-axis) : 720 mm
Resolution : 0,001 mm
AC motor drive, torque : 6 Nm
Ball screw, dia. x pitch : 32 x 10 mm

Feeds :
Working feeds, X-/Z-axis, stepless : 0-5000 mm/min
Rapid feed, X-/Z-axis : 8/10 m/min
Feed pressure, X-/Z-axis : 420/670 daN

Tooling system Turret :
Number of tool stations : 12
Number of powered tool stations : 6
AC motor drive, power in intermittent service : 3,7 kW
Torque max., intermittent : 36 Nm
Speed drive, max. : 5000 min-1
Standardized fixing of toolholders : VDI 30
Maximum tool size : 20 x 20 mm
Integrated cooling
Indexing in both senses of rotation

Coolant supply :
Capacity of coolant tank : 120 litres
Pump power : 10 l/min
Pressure : 5 bars

errors and omissions excepted data gived without obligation

Inventory 2230043 including :

1 Fanuc 18i control unit1 A2-6 spindle headstock1 VDI 30 12-position revolver for 6 rotating tools1 pneumatically operated tailstock 180-65.2001 SCHUNK Rota-s 200-52 A2-6 1×3 jaw chuck1 Brucker CM5 full rotary tailstock1 radial drilling-milling head ESX-25 max speed 5000 min-1 without nut EX ref 4100.005521 ESX-25 axial drilling-milling head max speed 5000 min-1 without nut EX ref 4100.005501 KENNAMETAL ESX-25 spindle without EX nut1 EWS ESX-25 spindle without EX nut4 toolholders radial left, short Form B2 ref 4100.01001 ESX-25 collet holder, form E3 with nut EX25 with Ø 5 mm collet1 dito without nut EX253 tapping collets Ø 4.5 – 6 and 8 mm1 tool holder for reversible insert drills Ø 40 mm bore, form E1 ref 4100.001241 reamer Ø 32 mm ref 4100.001071 Ø 20 mm reamer ref 4100.001051 boring bar tool holder Ø 8 mm form E2 ref 4100.001081 dito Ø 10 ref 4100.01091 dito Ø 12 ref 4100.01102 dito Ø 16 ref 4100.01111 dito Ø 20 ref 4100.01121 dito Ø 25 ref 4100.01131 dito Ø 32 ref 4100.01151 dito Ø 32 GARANT long5 Z2 steel protection plugs ref 4100.001301 left-hand axial tool holder, force C4 ref 4100.001031 pneumatically operated tailstock MT 5 ref 180-65.2001 microscope support ref 180-60.005
1 coolant device

OPTION

1 travelling steady rest with 3 jaws for Ø 30 – 120 mm ref 180-70.200 chf. 2’500.– + vat