Manufacturing origin : Swiss
Voltage : 380V 50Hz 3ph
Net weight : 950 kg
Dimensions : 140x110x160 cm
Customs position : 8459.2930
TECHNICAL DATA
Geometrical characteristics
Working surface of table : 650×250 mm
Number of T-slots : 4
Width of T-slots : 12-H7 mm
Distance between slots : 50 mm
Spindle internal taper : Iso 30 (40)
Bore through spindle : 17,8 (24,8) mm
Strokes and traverses
Longitudinal stroke
– table : 330 mm
– 1 turn of the handwheel is equal to a traverse of : 5 mm
Vertical stroke
– knee : 475 mm
– 1 turn of the handwheel is equal to a traverse of : 2 mm
Transverse stroke
– spindle-head slide : 400 mm
– 1 turn of the handwheel is equal to a traverse of : 5 mm
Drive, motors, power feeds, coolant system
Main motor
– spindle head, 2 speeds : 1500/3000 rpm
1,1 / 1,5 kW
Gearbox
– spindle head, number of speeds : 12
– range : 63-2800 rpm
63-90-125-180-250-355-
500-710-1000-1400-2000-
– approach-feed motor : 1000 rpm / 0,55 kW
– approach feed in longitudinal traverse : 2500 mm/min
– approach feed in vertical traverse : mm/min
– working feed motor : kW max 0,2
– range of adjustment in longitudinal traverse : 4-500 mm/min
– range of adjustment in vertical traverse : 1,6-200
Coolant-system motor : 3000 rpm / 0,15 kW
Coolant-pump delivery : 20 l/min
Tank capacity : 30 l
errors and omissions excepted-data given without obligation
Inventory Nr. 2180114, machine equipped with :
– 1 lightening
– 1 cooling device
– 1 power vice 125 mm. jaws-width
– 1 chips collector
– 4 collet holder ISO 40 for collets DIN 6388 form B – 462E
– 1 drill-chuck cap. 1-13 mm on fitting
– 1 mill fitting ISO 40 for mill Ø 6 mm
– 1 dito Ø 10 mm
– 1 dito Ø 12 mm
– 1 reduction sleeve ISO 40 / MT 1
– 1 dito ISO40 / MT 3
– 1 dito ISO40 / MT 4
– 1 mill fitting ISO 40 for end-mill – bore 16 mm
– 1 dito ISO40 bore 22 mm
– 1 dito ISO40 bore 27 mm
– 1 dito ISO40 bore 32 mm
– 1 dito ISO40 bore 40 mm
– 1 plate-mill fitting cap. 25×25 ISO 40
– 1 fitting ISO 40 with milling head Wohlhaupter
– 3 collets ISO 40 Ø 16 – 12 -6 mm