COLUMN DRILLING CINCINNATI NC 320 V
SKU: 1700103Standard equipment
– Drilling depth adjustment via a circular vernier scale with a freewheel mechanism.
– Bench-top version: height-adjustable head with a handwheel for raising and lowering the head.
– Column version: TR rectangular table with table height adjustment via a rack-and-pinion mechanism.
– Touchscreen for adjusting the spindle speed.
– Adjusts spindle speed according to the material.
– Speed variator 80 to 3000 rpm in 2 ranges: 80 to 425 and 385 to 3000 rpm
€ 7,465.50
Accessory options
For column version: reversible square table with vice on the opposite side TCE 1,200 CHF
CM4 taper (on 10-speed version) 390 CHF
Automatic tapping with bottom-hole reversal via position sensor and pedal-operated clearing function 1,190 CHF
LED tube lighting 260 CHF
Coolant supply: Bench-top version: 730 CHF
Column version: 860 CHF
Base with sump : Standard: 1,250 CHF
With door and shelf: 1,560 CHF
Micrometric feed device Automatic feed with electromagnetic clutch 1 feed rate: 0.1 mm/rev 2,990 CHF
Height-adjustable column (bench version) 100 or 200 mm 280 CHF
Mechanic’s base (for drill press) 550 CHF
CM3/B16 mounting shaft with 3–16 mm self-tightening chuck 218 CHF
Tapping set with CM3 tap holder and 7 sockets (M5 to M20, DIN standard) 870 CHF
Drilling vice, jaw opening and width 120 mm, EP120 BF 580 CHF
| Weight | 270 kg |
|---|---|
| Type | NC 320 V |
