TOOLROOM LATHE SCHAUBLIN 102 TO W-20

Inventory No. 2240050, machine consisting of:

1 NEW workbench, 2000×800 mm, with a blue Urphen worktop, 2000x800x50 mm
: 1 leg, 1 B750 cabinet with 7 drawers: 1xD50/2xD75/2xD100/1xD150/1×200

1 control bench mounted on top, planed
1 W-20 workpiece-holding headstock with gear reducer and clamping wrench, overhauled
1 overhauled cross slide

1 reconditioned aligned tailstock
1 380V/50Hz/3-phase motor, 2 speeds 720/1420 rpm – 0.9/0.6 CV
1 tension pulley with belt and V-belt

1 W-20/MT2 reduction sleeve with solid MT2
1 W-20 drive plate
1 set of 37 W20 collets
1 1×3-jaw chuck, Ø 100 mm, on W-20 flange, with additional jaw sets

1 set of TRIPAN tool holders including
– 1 type 111S turret with stud
– 2 chisel holders 131
– 1 chisel holder 131b
– 1 double chisel holder 132

1 self-tightening drill chuck, 1–13 mm, on CM2 shank
1 male center MT2

Manufacturing origin Swiss
Voltage : 380V 50Hz 3Ph
Netweight 300 kg
Customs position 8458.1930

TECHNICAL DATA

Capacities :
– height of centres : 102 mm
– distance between centre, standard headstock
type W 470 mm
– distance between centres, headstock type W with
reduction unit 375 mm
– swing over bed 200 mm
– swing over carriage 120 mm
Bed :
– height-width-length 168-100-1000 mm
cast-iron bed with ground inverted-V profile
Headstocks :
– spindle nose for collets W-25
– maximum bore through collet 19.0 mm
– headstock with reduction unit, ratio 1:5
Carriages :
– stroke of longitudinal tool slide : 90 mm
– stroke of transverse tool slide 100 mm
– size of tools : 12×12 mm
Tailstocks :
– internal taper of tailstock spindle Morse 2
– spindle stroke, screw- and handwheel-operated : 80 mm

errors and omission excepted-data given without obligation