BENCH DRILLING “CINCINNATI” TYPE NE 320 V
SKU: 1700073Standard Equipment :
Drilling depth adjustment with circular vernier and freewheel.
Bench version: height-adjustable head with hand crank for raising and lowering the head.
Column version: rectangular TR table with rack-and-pinion height adjustment.
Touchscreen for spindle speed adjustment.
Automatically adapts spindle speed according to the material.
CHF 6,820.00
Accessory options
For column version: reversible square table with vice on the opposite side TCE 1,200 CHF
CM4 taper (on 10-speed version) 390 CHF
Automatic tapping with bottom-hole reversal via position sensor and pedal-operated clearing function. 1,190 CHF
LED tube lighting 260 CHF (801322)
Coolant supply: Bench-mounted version: 730 CHF (800787)
Column-mounted version: 860 CHF (800802)
Base with sump : Standard: 1,250 CHF (800826)
With door and shelf: 1,560 CHF (800827)
Micrometric feed mechanism 630 CHF
Micrometric feed mechanism Automatic feed with electromagnetic clutch 1 feed rate: 0.1 mm/rev 2,990 CHF
Height-adjustable column (100 or 200 mm) 280 CHF (801446)
Mechanic’s base (for drill press) 550 CHF (801323)
CM3/B16 mounting shaft with self-tightening chuck 3–16 mm 218 CHF (801328+800138)
Tapping set with CM3 tap holder and 7 sockets M5 to M20 to DIN standard 870 CHF (800336)
Drilling vice, jaw opening and width 120 mm EP120 BF 580 CHF (800820)
Technical Specifications
Drilling capacity – Steel 60 kg (mm): 32
Tapping capacity: M20
Spindle taper: MT 3
Spindle sleeve diameter (mm): 80
Spindle travel (mm): 125
Standard power supply (Volt):
Please contact us for alternative voltage, 3-phase/400
Distance spindle–column (mm): 233
Column diameter (mm): 100
Speeds Electronic variable speed drive
Variable speed from 80 to 3000 rpm in 2 ranges:
80 to 625 rpm
385 to 3000 rpm
| Weight | 210 kg |
|---|---|
| Type | NE 320 V |
